1216 Bearing
Self-aligning ball bearing
- Bore d80 mm
- Outer dia. D140 mm
- Width B26 mm
- Weight≈ 1.5 kg
Light to medium loads with shaft deflection or misalignment.
Technical data
| Bearing designation | 1216 |
|---|---|
| Type | Self-aligning ball bearing |
| Bore d | 80 mm |
| Outer dia. D | 140 mm |
| Width B | 26 mm |
| Weight | ≈ 1.5 kg |
Dimensions are standard catalogue values; the weight is an approximate calculation. Please confirm before ordering.
Common suffixes for 1216
| 1216 K | Tapered bore, taper 1:12 |
|---|---|
| 1216 ETN9 | Reinforced internal design (higher load capacity) · Glass-fibre reinforced polyamide cage |
| 1216 C3 | Radial clearance larger than normal (for higher operating temperatures) |
| 1216 K C3 | Tapered bore, taper 1:12 · Radial clearance larger than normal (for higher operating temperatures) |
Click a designation to open it in the bearing finder. Suffix usage can differ slightly between brands.
Matching seal (radial shaft seal)
80 × 140 × 12 mm
Seal weight: ≈ 0.13 kg
Other common widths: 80 × 140 × 10 mm, 80 × 140 × 15 mm
The seal's inner diameter matches the shaft (80 mm) and its outer diameter matches the housing bore (140 mm); the width depends on the space in the housing. NBR (double lip, TC type) is recommended for general use and FKM (Viton) for high temperatures.
Quote for bearing and sealAll seal sizes and matching bearings →
Matching sleeve
H 216
Adapter sleeve H 216: call us for dimensions and stock.
A sleeve mounts a tapered-bore bearing on a plain cylindrical shaft and bridges the difference between the bearing bore and the shaft diameter.
Use with a sleeve requires the tapered-bore version of the bearing: 1216 K.
Quote for bearing and sleeve