2201 Bearing
Self-aligning ball bearing
- Bore d12 mm
- Outer dia. D32 mm
- Width B14 mm
- Weight≈ 0.055 kg
Light to medium loads with shaft deflection or misalignment.
Technical data
| Bearing designation | 2201 |
|---|---|
| Type | Self-aligning ball bearing |
| Bore d | 12 mm |
| Outer dia. D | 32 mm |
| Width B | 14 mm |
| Weight | ≈ 0.055 kg |
Dimensions are standard catalogue values; the weight is an approximate calculation. Please confirm before ordering.
Common suffixes for 2201
| 2201 K | Tapered bore, taper 1:12 |
|---|---|
| 2201 ETN9 | Reinforced internal design (higher load capacity) · Glass-fibre reinforced polyamide cage |
| 2201 C3 | Radial clearance larger than normal (for higher operating temperatures) |
| 2201 K C3 | Tapered bore, taper 1:12 · Radial clearance larger than normal (for higher operating temperatures) |
| 2201-2RS | Rubber seals on both sides (sealed), greased |
Click a designation to open it in the bearing finder. Suffix usage can differ slightly between brands.
Matching seal (radial shaft seal)
12 × 32 × 7 mm
Seal weight: ≈ 7 g
Other common widths: 12 × 32 × 10 mm
The seal's inner diameter matches the shaft (12 mm) and its outer diameter matches the housing bore (32 mm); the width depends on the space in the housing. NBR (double lip, TC type) is recommended for general use and FKM (Viton) for high temperatures.
Quote for bearing and sealAll seal sizes and matching bearings →