22226 Bearing
Spherical roller bearing
- Bore d130 mm
- Outer dia. D230 mm
- Width B64 mm
- Weight≈ 11 kg
Heavy loads and misalignment: conveyors, crushers, vibrating screens, mining and marine equipment.
Technical data
| Bearing designation | 22226 |
|---|---|
| Type | Spherical roller bearing |
| Bore d | 130 mm |
| Outer dia. D | 230 mm |
| Width B | 64 mm |
| Weight | ≈ 11 kg |
Dimensions are standard catalogue values; the weight is an approximate calculation. Please confirm before ordering.
Common suffixes for 22226
| 22226 E | Reinforced internal design (higher load capacity) |
|---|---|
| 22226 EK | Reinforced internal design (higher load capacity) · Tapered bore, taper 1:12 |
| 22226 CC | Spherical roller internal design (symmetrical rollers, steel cage) |
| 22226 CCK | Spherical roller internal design (symmetrical rollers, steel cage) · Tapered bore, taper 1:12 |
| 22226 CA | Spherical roller internal design (brass cage) |
| 22226 CAK | Spherical roller internal design (brass cage) · Tapered bore, taper 1:12 |
| 22226 CC W33 C3 | CC internal design; lubrication groove and holes in the outer ring (W33) · Radial clearance larger than normal (for higher operating temperatures) |
| 22226 CAK W33 C3 | Spherical roller internal design (brass cage) · Tapered bore, taper 1:12 · Lubrication groove and 3 lubrication holes in the outer ring · Radial clearance larger than normal (for higher operating temperatures) |
| 22226 E C3 | Reinforced internal design (higher load capacity) · Radial clearance larger than normal (for higher operating temperatures) |
Click a designation to open it in the bearing finder. Suffix usage can differ slightly between brands.
Matching seal (radial shaft seal)
130 × 230 × 15 mm
Seal weight: ≈ 0.44 kg
Other common widths: 130 × 230 × 12 mm, 130 × 230 × 20 mm
The seal's inner diameter matches the shaft (130 mm) and its outer diameter matches the housing bore (230 mm); the width depends on the space in the housing. NBR (double lip, TC type) is recommended for general use and FKM (Viton) for high temperatures.
Quote for bearing and sealAll seal sizes and matching bearings →
Matching sleeve
H 3126 · shaft 115 mm
Adapter sleeve H 3126: shaft diameter 115 mm, bearing bore 130 mm, width 92 mm. Used with lock nut KM26 and lock washer MB26.
H 3126 set weight (incl. lock nut and lock washer): ≈ 3.6 kg
Withdrawal sleeve AHX 3126: shaft diameter 125 mm, width 78 mm.
AHX 3126 weight: ≈ 0.87 kg
A sleeve mounts a tapered-bore bearing on a plain cylindrical shaft and bridges the difference between the bearing bore and the shaft diameter.
Use with a sleeve requires the tapered-bore version of the bearing: 22226 K.
Quote for bearing and sleeve