23021 Bearing
Spherical roller bearing
- Bore d105 mm
- Outer dia. D160 mm
- Width B41 mm
- Weight≈ 2.8 kg
Heavy loads and misalignment: conveyors, crushers, vibrating screens, mining and marine equipment.
Technical data
| Bearing designation | 23021 |
|---|---|
| Type | Spherical roller bearing |
| Bore d | 105 mm |
| Outer dia. D | 160 mm |
| Width B | 41 mm |
| Weight | ≈ 2.8 kg |
Dimensions are standard catalogue values; the weight is an approximate calculation. Please confirm before ordering.
Common suffixes for 23021
| 23021 E | Reinforced internal design (higher load capacity) |
|---|---|
| 23021 EK | Reinforced internal design (higher load capacity) · Tapered bore, taper 1:12 |
| 23021 CC | Spherical roller internal design (symmetrical rollers, steel cage) |
| 23021 CCK | Spherical roller internal design (symmetrical rollers, steel cage) · Tapered bore, taper 1:12 |
| 23021 CA | Spherical roller internal design (brass cage) |
| 23021 CAK | Spherical roller internal design (brass cage) · Tapered bore, taper 1:12 |
| 23021 CC W33 C3 | CC internal design; lubrication groove and holes in the outer ring (W33) · Radial clearance larger than normal (for higher operating temperatures) |
| 23021 CAK W33 C3 | Spherical roller internal design (brass cage) · Tapered bore, taper 1:12 · Lubrication groove and 3 lubrication holes in the outer ring · Radial clearance larger than normal (for higher operating temperatures) |
| 23021 E C3 | Reinforced internal design (higher load capacity) · Radial clearance larger than normal (for higher operating temperatures) |
Click a designation to open it in the bearing finder. Suffix usage can differ slightly between brands.
Matching seal (radial shaft seal)
105 × 160 × 12 mm
Seal weight: ≈ 0.16 kg
Other common widths: 105 × 160 × 10 mm, 105 × 160 × 15 mm
The seal's inner diameter matches the shaft (105 mm) and its outer diameter matches the housing bore (160 mm); the width depends on the space in the housing. NBR (double lip, TC type) is recommended for general use and FKM (Viton) for high temperatures.
Quote for bearing and sealAll seal sizes and matching bearings →
Matching sleeve
H 321 · shaft 95 mm
Adapter sleeve H 321: shaft diameter 95 mm, bearing bore 105 mm, width 74 mm. Used with lock nut KM21 and lock washer MB21.
H 321 set weight (incl. lock nut and lock washer): ≈ 1.8 kg
A sleeve mounts a tapered-bore bearing on a plain cylindrical shaft and bridges the difference between the bearing bore and the shaft diameter.
Use with a sleeve requires the tapered-bore version of the bearing: 23021 K.
Quote for bearing and sleeve