23024 Bearing
Spherical roller bearing
- Bore d120 mm
- Outer dia. D180 mm
- Width B46 mm
- Weight≈ 3.8 kg
Heavy loads and misalignment: conveyors, crushers, vibrating screens, mining and marine equipment.
Technical data
| Bearing designation | 23024 |
|---|---|
| Type | Spherical roller bearing |
| Bore d | 120 mm |
| Outer dia. D | 180 mm |
| Width B | 46 mm |
| Weight | ≈ 3.8 kg |
Dimensions are standard catalogue values; the weight is an approximate calculation. Please confirm before ordering.
Common suffixes for 23024
| 23024 E | Reinforced internal design (higher load capacity) |
|---|---|
| 23024 EK | Reinforced internal design (higher load capacity) · Tapered bore, taper 1:12 |
| 23024 CC | Spherical roller internal design (symmetrical rollers, steel cage) |
| 23024 CCK | Spherical roller internal design (symmetrical rollers, steel cage) · Tapered bore, taper 1:12 |
| 23024 CA | Spherical roller internal design (brass cage) |
| 23024 CAK | Spherical roller internal design (brass cage) · Tapered bore, taper 1:12 |
| 23024 CC W33 C3 | CC internal design; lubrication groove and holes in the outer ring (W33) · Radial clearance larger than normal (for higher operating temperatures) |
| 23024 CAK W33 C3 | Spherical roller internal design (brass cage) · Tapered bore, taper 1:12 · Lubrication groove and 3 lubrication holes in the outer ring · Radial clearance larger than normal (for higher operating temperatures) |
| 23024 E C3 | Reinforced internal design (higher load capacity) · Radial clearance larger than normal (for higher operating temperatures) |
Click a designation to open it in the bearing finder. Suffix usage can differ slightly between brands.
Matching seal (radial shaft seal)
120 × 180 × 12 mm
Seal weight: ≈ 0.2 kg
Other common widths: 120 × 180 × 10 mm, 120 × 180 × 15 mm
The seal's inner diameter matches the shaft (120 mm) and its outer diameter matches the housing bore (180 mm); the width depends on the space in the housing. NBR (double lip, TC type) is recommended for general use and FKM (Viton) for high temperatures.
Quote for bearing and sealAll seal sizes and matching bearings →
Matching sleeve
H 3024 · shaft 110 mm
Adapter sleeve H 3024: shaft diameter 110 mm, bearing bore 120 mm, width 72 mm. Used with lock nut KML24 and lock washer MBL24.
H 3024 set weight (incl. lock nut and lock washer): ≈ 1.8 kg
Withdrawal sleeve AHX 3024: shaft diameter 115 mm, width 60 mm.
AHX 3024 weight: ≈ 0.56 kg
A sleeve mounts a tapered-bore bearing on a plain cylindrical shaft and bridges the difference between the bearing bore and the shaft diameter.
Use with a sleeve requires the tapered-bore version of the bearing: 23024 K.
Quote for bearing and sleeve