23034 Bearing
Spherical roller bearing
- Bore d170 mm
- Outer dia. D260 mm
- Width B67 mm
- Weight≈ 12 kg
Heavy loads and misalignment: conveyors, crushers, vibrating screens, mining and marine equipment.
Technical data
| Bearing designation | 23034 |
|---|---|
| Type | Spherical roller bearing |
| Bore d | 170 mm |
| Outer dia. D | 260 mm |
| Width B | 67 mm |
| Weight | ≈ 12 kg |
Dimensions are standard catalogue values; the weight is an approximate calculation. Please confirm before ordering.
Common suffixes for 23034
| 23034 E | Reinforced internal design (higher load capacity) |
|---|---|
| 23034 EK | Reinforced internal design (higher load capacity) · Tapered bore, taper 1:12 |
| 23034 CC | Spherical roller internal design (symmetrical rollers, steel cage) |
| 23034 CCK | Spherical roller internal design (symmetrical rollers, steel cage) · Tapered bore, taper 1:12 |
| 23034 CA | Spherical roller internal design (brass cage) |
| 23034 CAK | Spherical roller internal design (brass cage) · Tapered bore, taper 1:12 |
| 23034 CC W33 C3 | CC internal design; lubrication groove and holes in the outer ring (W33) · Radial clearance larger than normal (for higher operating temperatures) |
| 23034 CAK W33 C3 | Spherical roller internal design (brass cage) · Tapered bore, taper 1:12 · Lubrication groove and 3 lubrication holes in the outer ring · Radial clearance larger than normal (for higher operating temperatures) |
| 23034 E C3 | Reinforced internal design (higher load capacity) · Radial clearance larger than normal (for higher operating temperatures) |
Click a designation to open it in the bearing finder. Suffix usage can differ slightly between brands.
Matching seal (radial shaft seal)
170 × 260 × 15 mm
Seal weight: ≈ 0.51 kg
Other common widths: 170 × 260 × 12 mm, 170 × 260 × 20 mm
The seal's inner diameter matches the shaft (170 mm) and its outer diameter matches the housing bore (260 mm); the width depends on the space in the housing. NBR (double lip, TC type) is recommended for general use and FKM (Viton) for high temperatures.
Quote for bearing and sealAll seal sizes and matching bearings →
Matching sleeve
H 3034 · shaft 150 mm
Adapter sleeve H 3034: shaft diameter 150 mm, bearing bore 170 mm, width 101 mm. Used with lock nut KML34 and lock washer MBL34.
H 3034 set weight (incl. lock nut and lock washer): ≈ 5.8 kg
Withdrawal sleeve AH 3034: shaft diameter 160 mm, width 85 mm.
AH 3034 weight: ≈ 2 kg
A sleeve mounts a tapered-bore bearing on a plain cylindrical shaft and bridges the difference between the bearing bore and the shaft diameter.
Use with a sleeve requires the tapered-bore version of the bearing: 23034 K.
Quote for bearing and sleeve