23124 Bearing
Spherical roller bearing
- Bore d120 mm
- Outer dia. D200 mm
- Width B62 mm
- Weight≈ 7.3 kg
Heavy loads and misalignment: conveyors, crushers, vibrating screens, mining and marine equipment.
Technical data
| Bearing designation | 23124 |
|---|---|
| Type | Spherical roller bearing |
| Bore d | 120 mm |
| Outer dia. D | 200 mm |
| Width B | 62 mm |
| Weight | ≈ 7.3 kg |
Dimensions are standard catalogue values; the weight is an approximate calculation. Please confirm before ordering.
Common suffixes for 23124
| 23124 E | Reinforced internal design (higher load capacity) |
|---|---|
| 23124 EK | Reinforced internal design (higher load capacity) · Tapered bore, taper 1:12 |
| 23124 CC | Spherical roller internal design (symmetrical rollers, steel cage) |
| 23124 CCK | Spherical roller internal design (symmetrical rollers, steel cage) · Tapered bore, taper 1:12 |
| 23124 CA | Spherical roller internal design (brass cage) |
| 23124 CAK | Spherical roller internal design (brass cage) · Tapered bore, taper 1:12 |
| 23124 CC W33 C3 | CC internal design; lubrication groove and holes in the outer ring (W33) · Radial clearance larger than normal (for higher operating temperatures) |
| 23124 CAK W33 C3 | Spherical roller internal design (brass cage) · Tapered bore, taper 1:12 · Lubrication groove and 3 lubrication holes in the outer ring · Radial clearance larger than normal (for higher operating temperatures) |
| 23124 E C3 | Reinforced internal design (higher load capacity) · Radial clearance larger than normal (for higher operating temperatures) |
Click a designation to open it in the bearing finder. Suffix usage can differ slightly between brands.
Matching seal (radial shaft seal)
120 × 200 × 15 mm
Seal weight: ≈ 0.31 kg
Other common widths: 120 × 200 × 12 mm, 120 × 200 × 20 mm
The seal's inner diameter matches the shaft (120 mm) and its outer diameter matches the housing bore (200 mm); the width depends on the space in the housing. NBR (double lip, TC type) is recommended for general use and FKM (Viton) for high temperatures.
Quote for bearing and sealAll seal sizes and matching bearings →
Matching sleeve
H 3124 · shaft 110 mm
Adapter sleeve H 3124: shaft diameter 110 mm, bearing bore 120 mm, width 88 mm. Used with lock nut KM24 and lock washer MB24.
H 3124 set weight (incl. lock nut and lock washer): ≈ 2.6 kg
Withdrawal sleeve AHX 3124: shaft diameter 115 mm, width 75 mm.
AHX 3124 weight: ≈ 0.76 kg
A sleeve mounts a tapered-bore bearing on a plain cylindrical shaft and bridges the difference between the bearing bore and the shaft diameter.
Use with a sleeve requires the tapered-bore version of the bearing: 23124 K.
Quote for bearing and sleeve