23180 Bearing
Spherical roller bearing
- Bore d400 mm
- Outer dia. D650 mm
- Width B200 mm
- Weight≈ 243 kg
Heavy loads and misalignment: conveyors, crushers, vibrating screens, mining and marine equipment.
Technical data
| Bearing designation | 23180 |
|---|---|
| Type | Spherical roller bearing |
| Bore d | 400 mm |
| Outer dia. D | 650 mm |
| Width B | 200 mm |
| Weight | ≈ 243 kg |
Dimensions are standard catalogue values; the weight is an approximate calculation. Please confirm before ordering.
Common suffixes for 23180
| 23180 E | Reinforced internal design (higher load capacity) |
|---|---|
| 23180 EK | Reinforced internal design (higher load capacity) · Tapered bore, taper 1:12 |
| 23180 CC | Spherical roller internal design (symmetrical rollers, steel cage) |
| 23180 CCK | Spherical roller internal design (symmetrical rollers, steel cage) · Tapered bore, taper 1:12 |
| 23180 CA | Spherical roller internal design (brass cage) |
| 23180 CAK | Spherical roller internal design (brass cage) · Tapered bore, taper 1:12 |
| 23180 CC W33 C3 | CC internal design; lubrication groove and holes in the outer ring (W33) · Radial clearance larger than normal (for higher operating temperatures) |
| 23180 CAK W33 C3 | Spherical roller internal design (brass cage) · Tapered bore, taper 1:12 · Lubrication groove and 3 lubrication holes in the outer ring · Radial clearance larger than normal (for higher operating temperatures) |
| 23180 E C3 | Reinforced internal design (higher load capacity) · Radial clearance larger than normal (for higher operating temperatures) |
Click a designation to open it in the bearing finder. Suffix usage can differ slightly between brands.
Matching seal (radial shaft seal)
Shaft diameter 400 mm
This bearing is usually fitted in a housing (often with an adapter sleeve); the seal depends on the housing type: V-ring, labyrinth or double-lip seal. Send us the housing number or bore size and we'll choose the right seal together.
Quote for bearing and sealMatching sleeve
H 3180 · shaft 380 mm
Adapter sleeve H 3180: shaft diameter 380 mm, bearing bore 400 mm, width 272 mm. Used with lock nut HM3180 and lock washer MS3180.
H 3180 set weight (incl. lock nut and lock washer): ≈ 61 kg
A sleeve mounts a tapered-bore bearing on a plain cylindrical shaft and bridges the difference between the bearing bore and the shaft diameter.
Use with a sleeve requires the tapered-bore version of the bearing: 23180 K.
Quote for bearing and sleeve