23222 Bearing
Spherical roller bearing
- Bore d110 mm
- Outer dia. D200 mm
- Width B69.8 mm
- Weight≈ 9 kg
Heavy loads and misalignment: conveyors, crushers, vibrating screens, mining and marine equipment.
Technical data
| Bearing designation | 23222 |
|---|---|
| Type | Spherical roller bearing |
| Bore d | 110 mm |
| Outer dia. D | 200 mm |
| Width B | 69.8 mm |
| Weight | ≈ 9 kg |
Dimensions are standard catalogue values; the weight is an approximate calculation. Please confirm before ordering.
Common suffixes for 23222
| 23222 E | Reinforced internal design (higher load capacity) |
|---|---|
| 23222 EK | Reinforced internal design (higher load capacity) · Tapered bore, taper 1:12 |
| 23222 CC | Spherical roller internal design (symmetrical rollers, steel cage) |
| 23222 CCK | Spherical roller internal design (symmetrical rollers, steel cage) · Tapered bore, taper 1:12 |
| 23222 CA | Spherical roller internal design (brass cage) |
| 23222 CAK | Spherical roller internal design (brass cage) · Tapered bore, taper 1:12 |
| 23222 CC W33 C3 | CC internal design; lubrication groove and holes in the outer ring (W33) · Radial clearance larger than normal (for higher operating temperatures) |
| 23222 CAK W33 C3 | Spherical roller internal design (brass cage) · Tapered bore, taper 1:12 · Lubrication groove and 3 lubrication holes in the outer ring · Radial clearance larger than normal (for higher operating temperatures) |
| 23222 E C3 | Reinforced internal design (higher load capacity) · Radial clearance larger than normal (for higher operating temperatures) |
Click a designation to open it in the bearing finder. Suffix usage can differ slightly between brands.
Matching seal (radial shaft seal)
110 × 200 × 15 mm
Seal weight: ≈ 0.33 kg
Other common widths: 110 × 200 × 12 mm, 110 × 200 × 20 mm
The seal's inner diameter matches the shaft (110 mm) and its outer diameter matches the housing bore (200 mm); the width depends on the space in the housing. NBR (double lip, TC type) is recommended for general use and FKM (Viton) for high temperatures.
Quote for bearing and sealAll seal sizes and matching bearings →
Matching sleeve
H 2322 · shaft 100 mm
Adapter sleeve H 2322: shaft diameter 100 mm, bearing bore 110 mm, width 105 mm. Used with lock nut KM22 and lock washer MB22.
H 2322 set weight (incl. lock nut and lock washer): ≈ 2.5 kg
Withdrawal sleeve AHX 3222G: shaft diameter 105 mm, width 82 mm.
AHX 3222G weight: ≈ 0.79 kg
A sleeve mounts a tapered-bore bearing on a plain cylindrical shaft and bridges the difference between the bearing bore and the shaft diameter.
Use with a sleeve requires the tapered-bore version of the bearing: 23222 K.
Quote for bearing and sleeve