23248 Bearing
Spherical roller bearing
- Bore d240 mm
- Outer dia. D440 mm
- Width B160 mm
- Weight≈ 101 kg
Heavy loads and misalignment: conveyors, crushers, vibrating screens, mining and marine equipment.
Technical data
| Bearing designation | 23248 |
|---|---|
| Type | Spherical roller bearing |
| Bore d | 240 mm |
| Outer dia. D | 440 mm |
| Width B | 160 mm |
| Weight | ≈ 101 kg |
Dimensions are standard catalogue values; the weight is an approximate calculation. Please confirm before ordering.
Common suffixes for 23248
| 23248 E | Reinforced internal design (higher load capacity) |
|---|---|
| 23248 EK | Reinforced internal design (higher load capacity) · Tapered bore, taper 1:12 |
| 23248 CC | Spherical roller internal design (symmetrical rollers, steel cage) |
| 23248 CCK | Spherical roller internal design (symmetrical rollers, steel cage) · Tapered bore, taper 1:12 |
| 23248 CA | Spherical roller internal design (brass cage) |
| 23248 CAK | Spherical roller internal design (brass cage) · Tapered bore, taper 1:12 |
| 23248 CC W33 C3 | CC internal design; lubrication groove and holes in the outer ring (W33) · Radial clearance larger than normal (for higher operating temperatures) |
| 23248 CAK W33 C3 | Spherical roller internal design (brass cage) · Tapered bore, taper 1:12 · Lubrication groove and 3 lubrication holes in the outer ring · Radial clearance larger than normal (for higher operating temperatures) |
| 23248 E C3 | Reinforced internal design (higher load capacity) · Radial clearance larger than normal (for higher operating temperatures) |
Click a designation to open it in the bearing finder. Suffix usage can differ slightly between brands.
Matching seal (radial shaft seal)
Shaft diameter 240 mm
This bearing is usually fitted in a housing (often with an adapter sleeve); the seal depends on the housing type: V-ring, labyrinth or double-lip seal. Send us the housing number or bore size and we'll choose the right seal together.
Quote for bearing and sealMatching sleeve
H 2348 · shaft 220 mm
Adapter sleeve H 2348: shaft diameter 220 mm, bearing bore 240 mm, width 199 mm. Used with lock nut HM48T and lock washer MB48.
H 2348 set weight (incl. lock nut and lock washer): ≈ 20 kg
A sleeve mounts a tapered-bore bearing on a plain cylindrical shaft and bridges the difference between the bearing bore and the shaft diameter.
Use with a sleeve requires the tapered-bore version of the bearing: 23248 K.
Quote for bearing and sleeve