23936 Bearing
Spherical roller bearing
- Bore d180 mm
- Outer dia. D250 mm
- Width B52 mm
- Weight≈ 7.2 kg
Heavy loads and misalignment: conveyors, crushers, vibrating screens, mining and marine equipment.
Technical data
| Bearing designation | 23936 |
|---|---|
| Type | Spherical roller bearing |
| Bore d | 180 mm |
| Outer dia. D | 250 mm |
| Width B | 52 mm |
| Weight | ≈ 7.2 kg |
Dimensions are standard catalogue values; the weight is an approximate calculation. Please confirm before ordering.
Common suffixes for 23936
| 23936 E | Reinforced internal design (higher load capacity) |
|---|---|
| 23936 EK | Reinforced internal design (higher load capacity) · Tapered bore, taper 1:12 |
| 23936 CC | Spherical roller internal design (symmetrical rollers, steel cage) |
| 23936 CCK | Spherical roller internal design (symmetrical rollers, steel cage) · Tapered bore, taper 1:12 |
| 23936 CA | Spherical roller internal design (brass cage) |
| 23936 CAK | Spherical roller internal design (brass cage) · Tapered bore, taper 1:12 |
| 23936 CC W33 C3 | CC internal design; lubrication groove and holes in the outer ring (W33) · Radial clearance larger than normal (for higher operating temperatures) |
| 23936 CAK W33 C3 | Spherical roller internal design (brass cage) · Tapered bore, taper 1:12 · Lubrication groove and 3 lubrication holes in the outer ring · Radial clearance larger than normal (for higher operating temperatures) |
| 23936 E C3 | Reinforced internal design (higher load capacity) · Radial clearance larger than normal (for higher operating temperatures) |
Click a designation to open it in the bearing finder. Suffix usage can differ slightly between brands.
Matching seal (radial shaft seal)
180 × 250 × 15 mm
Seal weight: ≈ 0.42 kg
Other common widths: 180 × 250 × 12 mm, 180 × 250 × 20 mm
The seal's inner diameter matches the shaft (180 mm) and its outer diameter matches the housing bore (250 mm); the width depends on the space in the housing. NBR (double lip, TC type) is recommended for general use and FKM (Viton) for high temperatures.
Quote for bearing and sealAll seal sizes and matching bearings →
Matching sleeve
H 3936 · shaft 160 mm
Adapter sleeve H 3936: shaft diameter 160 mm, bearing bore 180 mm, width 87 mm. Used with lock nut KML36 and lock washer MBL36.
H 3936 set weight (incl. lock nut and lock washer): ≈ 5.6 kg
A sleeve mounts a tapered-bore bearing on a plain cylindrical shaft and bridges the difference between the bearing bore and the shaft diameter.
Use with a sleeve requires the tapered-bore version of the bearing: 23936 K.
Quote for bearing and sleeve