24134 Bearing
Spherical roller bearing
- Bore d170 mm
- Outer dia. D280 mm
- Width B109 mm
- Weight≈ 25 kg
Heavy loads and misalignment: conveyors, crushers, vibrating screens, mining and marine equipment.
Technical data
| Bearing designation | 24134 |
|---|---|
| Type | Spherical roller bearing |
| Bore d | 170 mm |
| Outer dia. D | 280 mm |
| Width B | 109 mm |
| Weight | ≈ 25 kg |
Dimensions are standard catalogue values; the weight is an approximate calculation. Please confirm before ordering.
Common suffixes for 24134
| 24134 E | Reinforced internal design (higher load capacity) |
|---|---|
| 24134 CC | Spherical roller internal design (symmetrical rollers, steel cage) |
| 24134 CA | Spherical roller internal design (brass cage) |
| 24134 CC W33 C3 | CC internal design; lubrication groove and holes in the outer ring (W33) · Radial clearance larger than normal (for higher operating temperatures) |
| 24134 E C3 | Reinforced internal design (higher load capacity) · Radial clearance larger than normal (for higher operating temperatures) |
| 24134 K30 | Tapered bore, taper 1:30 |
Click a designation to open it in the bearing finder. Suffix usage can differ slightly between brands.
Matching seal (radial shaft seal)
170 × 280 × 15 mm
Seal weight: ≈ 0.66 kg
Other common widths: 170 × 280 × 12 mm, 170 × 280 × 20 mm
The seal's inner diameter matches the shaft (170 mm) and its outer diameter matches the housing bore (280 mm); the width depends on the space in the housing. NBR (double lip, TC type) is recommended for general use and FKM (Viton) for high temperatures.
Quote for bearing and sealAll seal sizes and matching bearings →
Matching sleeve
AH 24134 · shaft 160 mm
Withdrawal sleeve AH 24134: shaft diameter 160 mm, width 125 mm (taper 1:30).
AH 24134 weight: ≈ 3.3 kg
A sleeve mounts a tapered-bore bearing on a plain cylindrical shaft and bridges the difference between the bearing bore and the shaft diameter.
Use with a sleeve requires the tapered-bore version of the bearing: 24134 K30.
Quote for bearing and sleeve