51102 Bearing
Thrust ball bearing
- Bore d15 mm
- Outer dia. D28 mm
- Width B9 mm
- Weight≈ 0.023 kg
Axial (thrust) loads only: vertical shafts, jacks, turntables.
Technical data
| Bearing designation | 51102 |
|---|---|
| Type | Thrust ball bearing |
| Bore d | 15 mm |
| Outer dia. D | 28 mm |
| Width B | 9 mm |
| Weight | ≈ 0.023 kg |
Dimensions are standard catalogue values; the weight is an approximate calculation. Please confirm before ordering.
Common suffixes for 51102
| 51102 M | Machined brass cage |
|---|
Click a designation to open it in the bearing finder. Suffix usage can differ slightly between brands.
Matching seal (radial shaft seal)
15 × 28 × 7 mm
Seal weight: ≈ 5 g
Other common widths: 15 × 28 × 10 mm
For thrust bearings, the seal is chosen to suit the shaft diameter and the housing bore.
The seal's inner diameter matches the shaft (15 mm) and its outer diameter matches the housing bore (28 mm); the width depends on the space in the housing. NBR (double lip, TC type) is recommended for general use and FKM (Viton) for high temperatures.
Quote for bearing and sealAll seal sizes and matching bearings →