51130 Bearing
Thrust ball bearing
- Bore d150 mm
- Outer dia. D190 mm
- Width B31 mm
- Weight≈ 1.9 kg
Axial (thrust) loads only: vertical shafts, jacks, turntables.
Technical data
| Bearing designation | 51130 |
|---|---|
| Type | Thrust ball bearing |
| Bore d | 150 mm |
| Outer dia. D | 190 mm |
| Width B | 31 mm |
| Weight | ≈ 1.9 kg |
Dimensions are standard catalogue values; the weight is an approximate calculation. Please confirm before ordering.
Common suffixes for 51130
| 51130 M | Machined brass cage |
|---|
Click a designation to open it in the bearing finder. Suffix usage can differ slightly between brands.
Matching seal (radial shaft seal)
150 × 190 × 12 mm
Seal weight: ≈ 0.17 kg
Other common widths: 150 × 190 × 10 mm, 150 × 190 × 15 mm
For thrust bearings, the seal is chosen to suit the shaft diameter and the housing bore.
The seal's inner diameter matches the shaft (150 mm) and its outer diameter matches the housing bore (190 mm); the width depends on the space in the housing. NBR (double lip, TC type) is recommended for general use and FKM (Viton) for high temperatures.
Quote for bearing and sealAll seal sizes and matching bearings →