61905 Bearing
Deep groove ball bearing
- Bore d25 mm
- Outer dia. D42 mm
- Width B9 mm
- Weight≈ 0.043 kg
High-speed applications such as electric motors, pumps, fans and gear reducers.
Technical data
| Bearing designation | 61905 |
|---|---|
| Type | Deep groove ball bearing |
| Bore d | 25 mm |
| Outer dia. D | 42 mm |
| Width B | 9 mm |
| Weight | ≈ 0.043 kg |
Dimensions are standard catalogue values; the weight is an approximate calculation. Please confirm before ordering.
Common suffixes for 61905
| 61905 | Standard design (open, normal clearance) |
|---|---|
| 61905-2RS | Rubber seals on both sides (sealed), greased |
| 61905-ZZ | Metal shields on both sides (dust shields) |
| 61905 C3 | Radial clearance larger than normal (for higher operating temperatures) |
| 61905-2RS C3 | Rubber seals on both sides (sealed), greased · Radial clearance larger than normal (for higher operating temperatures) |
| 61905-ZZ C3 | Metal shields on both sides (dust shields) · Radial clearance larger than normal (for higher operating temperatures) |
| 61905-Z | Metal shield on one side |
| 61905-RS | Rubber seal on one side |
Click a designation to open it in the bearing finder. Suffix usage can differ slightly between brands.
Matching seal (radial shaft seal)
25 × 42 × 7 mm
Seal weight: ≈ 10 g
Other common widths: 25 × 42 × 10 mm
The seal's inner diameter matches the shaft (25 mm) and its outer diameter matches the housing bore (42 mm); the width depends on the space in the housing. NBR (double lip, TC type) is recommended for general use and FKM (Viton) for high temperatures.
Quote for bearing and sealAll seal sizes and matching bearings →