AHX310 Withdrawal Sleeve
Withdrawal sleeve (AH)
- Shaft dia. d145 mm
- Bearing bore d50 mm
- Width B135 mm
- Weight≈ 0.11 kg
Seats a tapered-bore bearing on the shaft and simplifies removal; used especially with large spherical roller bearings and on stepped shafts.
Technical data
| Sleeve designation | AHX310 |
|---|---|
| Type | Withdrawal sleeve (AH) |
| Shaft dia. d1 | 45 mm |
| Bearing bore d | 50 mm |
| Width B1 | 35 mm |
| Weight | ≈ 0.11 kg |
Designation meaning and notes
- Taper 1:12. Removed with a nut or a hydraulic nut.
- Listed as AH 310 by some manufacturers.
Dimensions are standard catalogue values; the weight is an approximate calculation. Please confirm before ordering.
Bearings that fit this sleeve
2 bearings
The tapered-bore version (K) of the bearing is used. Shaft diameter 45 mm, bearing bore 50 mm.
Quote for this sleeve