MR95 Bearing
Deep groove ball bearing
- Bore d5 mm
- Outer dia. D9 mm
- Width B3 mm
- Weight≈ 0.7 g
High-speed applications such as electric motors, pumps, fans and gear reducers.
Technical data
| Bearing designation | MR95 |
|---|---|
| Type | Deep groove ball bearing |
| Bore d | 5 mm |
| Outer dia. D | 9 mm |
| Width B | 3 mm |
| Weight | ≈ 0.7 g |
Designation meaning and notes
- Miniature bearing; the width is for the ZZ (shielded) type – the open type may be narrower.
Dimensions are standard catalogue values; the weight is an approximate calculation. Please confirm before ordering.
Common suffixes for MR95
| MR95 | Standard design (open, normal clearance) |
|---|---|
| MR95-2RS | Rubber seals on both sides (sealed), greased |
| MR95-ZZ | Metal shields on both sides (dust shields) |
Click a designation to open it in the bearing finder. Suffix usage can differ slightly between brands.
Matching seal (radial shaft seal)
5 × 9 × 7 mm
Seal weight: ≈ 1 g
Other common widths: 5 × 9 × 10 mm
The seal's inner diameter matches the shaft (5 mm) and its outer diameter matches the housing bore (9 mm); the width depends on the space in the housing. NBR (double lip, TC type) is recommended for general use and FKM (Viton) for high temperatures.
Quote for bearing and seal