N214 Bearing
Cylindrical roller bearing
- Bore d70 mm
- Outer dia. D125 mm
- Width B24 mm
- Weight≈ 1.2 kg
High radial loads: gearboxes, rolling mills, large electric motors.
Technical data
| Bearing designation | N214 |
|---|---|
| Type | Cylindrical roller bearing |
| Bore d | 70 mm |
| Outer dia. D | 125 mm |
| Width B | 24 mm |
| Weight | ≈ 1.2 kg |
Designation meaning and notes
- N: two ribs on the inner ring, outer ring without ribs.
Dimensions are standard catalogue values; the weight is an approximate calculation. Please confirm before ordering.
Common suffixes for N214
| N214 E | Reinforced internal design (higher load capacity) |
|---|---|
| N214 ECP | Reinforced internal design, polyamide cage |
| N214 ECJ | Reinforced internal design, pressed steel cage |
| N214 ECM | Reinforced internal design, brass cage |
| N214 EM | Reinforced internal design, brass cage |
| N214 M | Machined brass cage |
| N214 E C3 | Reinforced internal design (higher load capacity) · Radial clearance larger than normal (for higher operating temperatures) |
| N214 EM C3 | Reinforced internal design, brass cage · Radial clearance larger than normal (for higher operating temperatures) |
Click a designation to open it in the bearing finder. Suffix usage can differ slightly between brands.
Matching seal (radial shaft seal)
70 × 125 × 10 mm
Seal weight: ≈ 0.098 kg
Other common widths: 70 × 125 × 8 mm, 70 × 125 × 12 mm
The seal's inner diameter matches the shaft (70 mm) and its outer diameter matches the housing bore (125 mm); the width depends on the space in the housing. NBR (double lip, TC type) is recommended for general use and FKM (Viton) for high temperatures.
Quote for bearing and sealAll seal sizes and matching bearings →