NJ211 Bearing
Cylindrical roller bearing
- Bore d55 mm
- Outer dia. D100 mm
- Width B21 mm
- Weight≈ 0.68 kg
High radial loads: gearboxes, rolling mills, large electric motors.
Technical data
| Bearing designation | NJ211 |
|---|---|
| Type | Cylindrical roller bearing |
| Bore d | 55 mm |
| Outer dia. D | 100 mm |
| Width B | 21 mm |
| Weight | ≈ 0.68 kg |
Designation meaning and notes
- NJ: one rib on the inner ring; carries axial load in one direction.
Dimensions are standard catalogue values; the weight is an approximate calculation. Please confirm before ordering.
Common suffixes for NJ211
| NJ211 E | Reinforced internal design (higher load capacity) |
|---|---|
| NJ211 ECP | Reinforced internal design, polyamide cage |
| NJ211 ECJ | Reinforced internal design, pressed steel cage |
| NJ211 ECM | Reinforced internal design, brass cage |
| NJ211 EM | Reinforced internal design, brass cage |
| NJ211 M | Machined brass cage |
| NJ211 E C3 | Reinforced internal design (higher load capacity) · Radial clearance larger than normal (for higher operating temperatures) |
| NJ211 EM C3 | Reinforced internal design, brass cage · Radial clearance larger than normal (for higher operating temperatures) |
Click a designation to open it in the bearing finder. Suffix usage can differ slightly between brands.
Matching seal (radial shaft seal)
55 × 100 × 10 mm
Seal weight: ≈ 0.063 kg
Other common widths: 55 × 100 × 8 mm, 55 × 100 × 12 mm
The seal's inner diameter matches the shaft (55 mm) and its outer diameter matches the housing bore (100 mm); the width depends on the space in the housing. NBR (double lip, TC type) is recommended for general use and FKM (Viton) for high temperatures.
Quote for bearing and sealAll seal sizes and matching bearings →