NJ2318 Bearing
Cylindrical roller bearing
- Bore d90 mm
- Outer dia. D190 mm
- Width B64 mm
- Weight≈ 8.3 kg
High radial loads: gearboxes, rolling mills, large electric motors.
Technical data
| Bearing designation | NJ2318 |
|---|---|
| Type | Cylindrical roller bearing |
| Bore d | 90 mm |
| Outer dia. D | 190 mm |
| Width B | 64 mm |
| Weight | ≈ 8.3 kg |
Designation meaning and notes
- NJ: one rib on the inner ring; carries axial load in one direction.
Dimensions are standard catalogue values; the weight is an approximate calculation. Please confirm before ordering.
Common suffixes for NJ2318
| NJ2318 E | Reinforced internal design (higher load capacity) |
|---|---|
| NJ2318 ECP | Reinforced internal design, polyamide cage |
| NJ2318 ECJ | Reinforced internal design, pressed steel cage |
| NJ2318 ECM | Reinforced internal design, brass cage |
| NJ2318 EM | Reinforced internal design, brass cage |
| NJ2318 M | Machined brass cage |
| NJ2318 E C3 | Reinforced internal design (higher load capacity) · Radial clearance larger than normal (for higher operating temperatures) |
| NJ2318 EM C3 | Reinforced internal design, brass cage · Radial clearance larger than normal (for higher operating temperatures) |
Click a designation to open it in the bearing finder. Suffix usage can differ slightly between brands.
Matching seal (radial shaft seal)
90 × 190 × 12 mm
Seal weight: ≈ 0.29 kg
Other common widths: 90 × 190 × 10 mm, 90 × 190 × 15 mm
The seal's inner diameter matches the shaft (90 mm) and its outer diameter matches the housing bore (190 mm); the width depends on the space in the housing. NBR (double lip, TC type) is recommended for general use and FKM (Viton) for high temperatures.
Quote for bearing and sealAll seal sizes and matching bearings →