NU322 Bearing
Cylindrical roller bearing
- Bore d110 mm
- Outer dia. D240 mm
- Width B50 mm
- Weight≈ 11 kg
High radial loads: gearboxes, rolling mills, large electric motors.
Technical data
| Bearing designation | NU322 |
|---|---|
| Type | Cylindrical roller bearing |
| Bore d | 110 mm |
| Outer dia. D | 240 mm |
| Width B | 50 mm |
| Weight | ≈ 11 kg |
Designation meaning and notes
- NU: two ribs on the outer ring, inner ring without ribs; the shaft can move axially.
Dimensions are standard catalogue values; the weight is an approximate calculation. Please confirm before ordering.
Common suffixes for NU322
| NU322 E | Reinforced internal design (higher load capacity) |
|---|---|
| NU322 ECP | Reinforced internal design, polyamide cage |
| NU322 ECJ | Reinforced internal design, pressed steel cage |
| NU322 ECM | Reinforced internal design, brass cage |
| NU322 EM | Reinforced internal design, brass cage |
| NU322 M | Machined brass cage |
| NU322 E C3 | Reinforced internal design (higher load capacity) · Radial clearance larger than normal (for higher operating temperatures) |
| NU322 EM C3 | Reinforced internal design, brass cage · Radial clearance larger than normal (for higher operating temperatures) |
Click a designation to open it in the bearing finder. Suffix usage can differ slightly between brands.
Matching seal (radial shaft seal)
110 × 240 × 15 mm
Seal weight: ≈ 0.54 kg
Other common widths: 110 × 240 × 12 mm, 110 × 240 × 20 mm
The seal's inner diameter matches the shaft (110 mm) and its outer diameter matches the housing bore (240 mm); the width depends on the space in the housing. NBR (double lip, TC type) is recommended for general use and FKM (Viton) for high temperatures.
Quote for bearing and sealAll seal sizes and matching bearings →