NUP1015 Bearing
Cylindrical roller bearing
- Bore d75 mm
- Outer dia. D115 mm
- Width B20 mm
- Weight≈ 0.7 kg
High radial loads: gearboxes, rolling mills, large electric motors.
Technical data
| Bearing designation | NUP1015 |
|---|---|
| Type | Cylindrical roller bearing |
| Bore d | 75 mm |
| Outer dia. D | 115 mm |
| Width B | 20 mm |
| Weight | ≈ 0.7 kg |
Designation meaning and notes
- NUP: inner ring rib plus loose rib washer; locates the shaft axially in both directions.
Dimensions are standard catalogue values; the weight is an approximate calculation. Please confirm before ordering.
Common suffixes for NUP1015
| NUP1015 E | Reinforced internal design (higher load capacity) |
|---|---|
| NUP1015 ECP | Reinforced internal design, polyamide cage |
| NUP1015 ECJ | Reinforced internal design, pressed steel cage |
| NUP1015 ECM | Reinforced internal design, brass cage |
| NUP1015 EM | Reinforced internal design, brass cage |
| NUP1015 M | Machined brass cage |
| NUP1015 E C3 | Reinforced internal design (higher load capacity) · Radial clearance larger than normal (for higher operating temperatures) |
| NUP1015 EM C3 | Reinforced internal design, brass cage · Radial clearance larger than normal (for higher operating temperatures) |
Click a designation to open it in the bearing finder. Suffix usage can differ slightly between brands.
Matching seal (radial shaft seal)
75 × 115 × 10 mm
Seal weight: ≈ 0.073 kg
Other common widths: 75 × 115 × 8 mm, 75 × 115 × 12 mm
The seal's inner diameter matches the shaft (75 mm) and its outer diameter matches the housing bore (115 mm); the width depends on the space in the housing. NBR (double lip, TC type) is recommended for general use and FKM (Viton) for high temperatures.
Quote for bearing and sealAll seal sizes and matching bearings →