NUP1084 Bearing
Cylindrical roller bearing
- Bore d420 mm
- Outer dia. D620 mm
- Width B90 mm
- Weight≈ 87 kg
High radial loads: gearboxes, rolling mills, large electric motors.
Technical data
| Bearing designation | NUP1084 |
|---|---|
| Type | Cylindrical roller bearing |
| Bore d | 420 mm |
| Outer dia. D | 620 mm |
| Width B | 90 mm |
| Weight | ≈ 87 kg |
Designation meaning and notes
- NUP: inner ring rib plus loose rib washer; locates the shaft axially in both directions.
Dimensions are standard catalogue values; the weight is an approximate calculation. Please confirm before ordering.
Common suffixes for NUP1084
| NUP1084 E | Reinforced internal design (higher load capacity) |
|---|---|
| NUP1084 ECP | Reinforced internal design, polyamide cage |
| NUP1084 ECJ | Reinforced internal design, pressed steel cage |
| NUP1084 ECM | Reinforced internal design, brass cage |
| NUP1084 EM | Reinforced internal design, brass cage |
| NUP1084 M | Machined brass cage |
| NUP1084 E C3 | Reinforced internal design (higher load capacity) · Radial clearance larger than normal (for higher operating temperatures) |
| NUP1084 EM C3 | Reinforced internal design, brass cage · Radial clearance larger than normal (for higher operating temperatures) |
Click a designation to open it in the bearing finder. Suffix usage can differ slightly between brands.
Matching seal (radial shaft seal)
420 × 620 × 20 mm
Other common widths: 420 × 620 × 15 mm
Seals this size are often made to order; send us the housing size and we'll confirm together.
The seal's inner diameter matches the shaft (420 mm) and its outer diameter matches the housing bore (620 mm); the width depends on the space in the housing. NBR (double lip, TC type) is recommended for general use and FKM (Viton) for high temperatures.
Quote for bearing and seal