NUP219 Bearing
Cylindrical roller bearing
- Bore d95 mm
- Outer dia. D170 mm
- Width B32 mm
- Weight≈ 2.9 kg
High radial loads: gearboxes, rolling mills, large electric motors.
Technical data
| Bearing designation | NUP219 |
|---|---|
| Type | Cylindrical roller bearing |
| Bore d | 95 mm |
| Outer dia. D | 170 mm |
| Width B | 32 mm |
| Weight | ≈ 2.9 kg |
Designation meaning and notes
- NUP: inner ring rib plus loose rib washer; locates the shaft axially in both directions.
Dimensions are standard catalogue values; the weight is an approximate calculation. Please confirm before ordering.
Common suffixes for NUP219
| NUP219 E | Reinforced internal design (higher load capacity) |
|---|---|
| NUP219 ECP | Reinforced internal design, polyamide cage |
| NUP219 ECJ | Reinforced internal design, pressed steel cage |
| NUP219 ECM | Reinforced internal design, brass cage |
| NUP219 EM | Reinforced internal design, brass cage |
| NUP219 M | Machined brass cage |
| NUP219 E C3 | Reinforced internal design (higher load capacity) · Radial clearance larger than normal (for higher operating temperatures) |
| NUP219 EM C3 | Reinforced internal design, brass cage · Radial clearance larger than normal (for higher operating temperatures) |
Click a designation to open it in the bearing finder. Suffix usage can differ slightly between brands.
Matching seal (radial shaft seal)
95 × 170 × 12 mm
Seal weight: ≈ 0.21 kg
Other common widths: 95 × 170 × 10 mm, 95 × 170 × 15 mm
The seal's inner diameter matches the shaft (95 mm) and its outer diameter matches the housing bore (170 mm); the width depends on the space in the housing. NBR (double lip, TC type) is recommended for general use and FKM (Viton) for high temperatures.
Quote for bearing and sealAll seal sizes and matching bearings →