NUP420 Bearing
Cylindrical roller bearing
- Bore d100 mm
- Outer dia. D250 mm
- Width B58 mm
- Weight≈ 14 kg
High radial loads: gearboxes, rolling mills, large electric motors.
Technical data
| Bearing designation | NUP420 |
|---|---|
| Type | Cylindrical roller bearing |
| Bore d | 100 mm |
| Outer dia. D | 250 mm |
| Width B | 58 mm |
| Weight | ≈ 14 kg |
Designation meaning and notes
- NUP: inner ring rib plus loose rib washer; locates the shaft axially in both directions.
Dimensions are standard catalogue values; the weight is an approximate calculation. Please confirm before ordering.
Common suffixes for NUP420
| NUP420 E | Reinforced internal design (higher load capacity) |
|---|---|
| NUP420 ECP | Reinforced internal design, polyamide cage |
| NUP420 ECJ | Reinforced internal design, pressed steel cage |
| NUP420 ECM | Reinforced internal design, brass cage |
| NUP420 EM | Reinforced internal design, brass cage |
| NUP420 M | Machined brass cage |
| NUP420 E C3 | Reinforced internal design (higher load capacity) · Radial clearance larger than normal (for higher operating temperatures) |
| NUP420 EM C3 | Reinforced internal design, brass cage · Radial clearance larger than normal (for higher operating temperatures) |
Click a designation to open it in the bearing finder. Suffix usage can differ slightly between brands.
Matching seal (radial shaft seal)
100 × 250 × 15 mm
Seal weight: ≈ 0.63 kg
Other common widths: 100 × 250 × 12 mm, 100 × 250 × 20 mm
The seal's inner diameter matches the shaft (100 mm) and its outer diameter matches the housing bore (250 mm); the width depends on the space in the housing. NBR (double lip, TC type) is recommended for general use and FKM (Viton) for high temperatures.
Quote for bearing and sealAll seal sizes and matching bearings →