QJ240 Bearing
Four-point contact ball bearing
- Bore d200 mm
- Outer dia. D360 mm
- Width B58 mm
- Weight≈ 26 kg
High axial loads in both directions: compressors, gearboxes and pump shafts.
Technical data
| Bearing designation | QJ240 |
|---|---|
| Type | Four-point contact ball bearing |
| Bore d | 200 mm |
| Outer dia. D | 360 mm |
| Width B | 58 mm |
| Weight | ≈ 26 kg |
Designation meaning and notes
- Four-point contact; split inner ring.
Dimensions are standard catalogue values; the weight is an approximate calculation. Please confirm before ordering.
Common suffixes for QJ240
| QJ240 MA | Machined brass cage, outer ring guided |
|---|
Click a designation to open it in the bearing finder. Suffix usage can differ slightly between brands.
Matching seal (radial shaft seal)
200 × 360 × 20 mm
Other common widths: 200 × 360 × 15 mm
Seals this size are often made to order; send us the housing size and we'll confirm together.
The seal's inner diameter matches the shaft (200 mm) and its outer diameter matches the housing bore (360 mm); the width depends on the space in the housing. NBR (double lip, TC type) is recommended for general use and FKM (Viton) for high temperatures.
Quote for bearing and seal