1320 Bearing
Self-aligning ball bearing
- Bore d100 mm
- Outer dia. D215 mm
- Width B47 mm
- Weight≈ 7.6 kg
Light to medium loads with shaft deflection or misalignment.
Technical data
| Bearing designation | 1320 |
|---|---|
| Type | Self-aligning ball bearing |
| Bore d | 100 mm |
| Outer dia. D | 215 mm |
| Width B | 47 mm |
| Weight | ≈ 7.6 kg |
Dimensions are standard catalogue values; the weight is an approximate calculation. Please confirm before ordering.
Common suffixes for 1320
| 1320 K | Tapered bore, taper 1:12 |
|---|---|
| 1320 ETN9 | Reinforced internal design (higher load capacity) · Glass-fibre reinforced polyamide cage |
| 1320 C3 | Radial clearance larger than normal (for higher operating temperatures) |
| 1320 K C3 | Tapered bore, taper 1:12 · Radial clearance larger than normal (for higher operating temperatures) |
Click a designation to open it in the bearing finder. Suffix usage can differ slightly between brands.
Matching seal (radial shaft seal)
100 × 215 × 15 mm
Seal weight: ≈ 0.42 kg
Other common widths: 100 × 215 × 12 mm, 100 × 215 × 20 mm
The seal's inner diameter matches the shaft (100 mm) and its outer diameter matches the housing bore (215 mm); the width depends on the space in the housing. NBR (double lip, TC type) is recommended for general use and FKM (Viton) for high temperatures.
Quote for bearing and sealAll seal sizes and matching bearings →
Matching sleeve
H 320 · shaft 90 mm
Adapter sleeve H 320: shaft diameter 90 mm, bearing bore 100 mm, width 71 mm. Used with lock nut KM20 and lock washer MB20.
H 320 set weight (incl. lock nut and lock washer): ≈ 1.6 kg
A sleeve mounts a tapered-bore bearing on a plain cylindrical shaft and bridges the difference between the bearing bore and the shaft diameter.
Use with a sleeve requires the tapered-bore version of the bearing: 1320 K.
Quote for bearing and sleeve