N320 Bearing
Cylindrical roller bearing
- Bore d100 mm
- Outer dia. D215 mm
- Width B47 mm
- Weight≈ 7.9 kg
High radial loads: gearboxes, rolling mills, large electric motors.
Technical data
| Bearing designation | N320 |
|---|---|
| Type | Cylindrical roller bearing |
| Bore d | 100 mm |
| Outer dia. D | 215 mm |
| Width B | 47 mm |
| Weight | ≈ 7.9 kg |
Designation meaning and notes
- N: two ribs on the inner ring, outer ring without ribs.
Dimensions are standard catalogue values; the weight is an approximate calculation. Please confirm before ordering.
Common suffixes for N320
| N320 E | Reinforced internal design (higher load capacity) |
|---|---|
| N320 ECP | Reinforced internal design, polyamide cage |
| N320 ECJ | Reinforced internal design, pressed steel cage |
| N320 ECM | Reinforced internal design, brass cage |
| N320 EM | Reinforced internal design, brass cage |
| N320 M | Machined brass cage |
| N320 E C3 | Reinforced internal design (higher load capacity) · Radial clearance larger than normal (for higher operating temperatures) |
| N320 EM C3 | Reinforced internal design, brass cage · Radial clearance larger than normal (for higher operating temperatures) |
Click a designation to open it in the bearing finder. Suffix usage can differ slightly between brands.
Matching seal (radial shaft seal)
100 × 215 × 15 mm
Seal weight: ≈ 0.42 kg
Other common widths: 100 × 215 × 12 mm, 100 × 215 × 20 mm
The seal's inner diameter matches the shaft (100 mm) and its outer diameter matches the housing bore (215 mm); the width depends on the space in the housing. NBR (double lip, TC type) is recommended for general use and FKM (Viton) for high temperatures.
Quote for bearing and sealAll seal sizes and matching bearings →