N321 Bearing
Cylindrical roller bearing
- Bore d105 mm
- Outer dia. D225 mm
- Width B49 mm
- Weight≈ 9 kg
High radial loads: gearboxes, rolling mills, large electric motors.
Technical data
| Bearing designation | N321 |
|---|---|
| Type | Cylindrical roller bearing |
| Bore d | 105 mm |
| Outer dia. D | 225 mm |
| Width B | 49 mm |
| Weight | ≈ 9 kg |
Designation meaning and notes
- N: two ribs on the inner ring, outer ring without ribs.
Dimensions are standard catalogue values; the weight is an approximate calculation. Please confirm before ordering.
Common suffixes for N321
| N321 E | Reinforced internal design (higher load capacity) |
|---|---|
| N321 ECP | Reinforced internal design, polyamide cage |
| N321 ECJ | Reinforced internal design, pressed steel cage |
| N321 ECM | Reinforced internal design, brass cage |
| N321 EM | Reinforced internal design, brass cage |
| N321 M | Machined brass cage |
| N321 E C3 | Reinforced internal design (higher load capacity) · Radial clearance larger than normal (for higher operating temperatures) |
| N321 EM C3 | Reinforced internal design, brass cage · Radial clearance larger than normal (for higher operating temperatures) |
Click a designation to open it in the bearing finder. Suffix usage can differ slightly between brands.
Matching seal (radial shaft seal)
105 × 225 × 15 mm
Seal weight: ≈ 0.46 kg
Other common widths: 105 × 225 × 12 mm, 105 × 225 × 20 mm
The seal's inner diameter matches the shaft (105 mm) and its outer diameter matches the housing bore (225 mm); the width depends on the space in the housing. NBR (double lip, TC type) is recommended for general use and FKM (Viton) for high temperatures.
Quote for bearing and sealAll seal sizes and matching bearings →