22218 Bearing
Spherical roller bearing
- Bore d90 mm
- Outer dia. D160 mm
- Width B40 mm
- Weight≈ 3.2 kg
Heavy loads and misalignment: conveyors, crushers, vibrating screens, mining and marine equipment.
Technical data
| Bearing designation | 22218 |
|---|---|
| Type | Spherical roller bearing |
| Bore d | 90 mm |
| Outer dia. D | 160 mm |
| Width B | 40 mm |
| Weight | ≈ 3.2 kg |
Dimensions are standard catalogue values; the weight is an approximate calculation. Please confirm before ordering.
Common suffixes for 22218
| 22218 E | Reinforced internal design (higher load capacity) |
|---|---|
| 22218 EK | Reinforced internal design (higher load capacity) · Tapered bore, taper 1:12 |
| 22218 CC | Spherical roller internal design (symmetrical rollers, steel cage) |
| 22218 CCK | Spherical roller internal design (symmetrical rollers, steel cage) · Tapered bore, taper 1:12 |
| 22218 CA | Spherical roller internal design (brass cage) |
| 22218 CAK | Spherical roller internal design (brass cage) · Tapered bore, taper 1:12 |
| 22218 CC W33 C3 | CC internal design; lubrication groove and holes in the outer ring (W33) · Radial clearance larger than normal (for higher operating temperatures) |
| 22218 CAK W33 C3 | Spherical roller internal design (brass cage) · Tapered bore, taper 1:12 · Lubrication groove and 3 lubrication holes in the outer ring · Radial clearance larger than normal (for higher operating temperatures) |
| 22218 E C3 | Reinforced internal design (higher load capacity) · Radial clearance larger than normal (for higher operating temperatures) |
Click a designation to open it in the bearing finder. Suffix usage can differ slightly between brands.
Matching seal (radial shaft seal)
90 × 160 × 12 mm
Seal weight: ≈ 0.18 kg
Other common widths: 90 × 160 × 10 mm, 90 × 160 × 15 mm
The seal's inner diameter matches the shaft (90 mm) and its outer diameter matches the housing bore (160 mm); the width depends on the space in the housing. NBR (double lip, TC type) is recommended for general use and FKM (Viton) for high temperatures.
Quote for bearing and sealAll seal sizes and matching bearings →
Matching sleeve
H 318 · shaft 80 mm
Adapter sleeve H 318: shaft diameter 80 mm, bearing bore 90 mm, width 65 mm. Used with lock nut KM18 and lock washer MB18.
H 318 set weight (incl. lock nut and lock washer): ≈ 1.3 kg
Withdrawal sleeve AHX 318: shaft diameter 85 mm, width 53 mm.
AHX 318 weight: ≈ 0.35 kg
A sleeve mounts a tapered-bore bearing on a plain cylindrical shaft and bridges the difference between the bearing bore and the shaft diameter.
Use with a sleeve requires the tapered-bore version of the bearing: 22218 K.
Quote for bearing and sleeve