2302 Bearing
Self-aligning ball bearing
- Bore d15 mm
- Outer dia. D42 mm
- Width B17 mm
- Weight≈ 0.12 kg
Light to medium loads with shaft deflection or misalignment.
Technical data
| Bearing designation | 2302 |
|---|---|
| Type | Self-aligning ball bearing |
| Bore d | 15 mm |
| Outer dia. D | 42 mm |
| Width B | 17 mm |
| Weight | ≈ 0.12 kg |
Dimensions are standard catalogue values; the weight is an approximate calculation. Please confirm before ordering.
Common suffixes for 2302
| 2302 K | Tapered bore, taper 1:12 |
|---|---|
| 2302 ETN9 | Reinforced internal design (higher load capacity) · Glass-fibre reinforced polyamide cage |
| 2302 C3 | Radial clearance larger than normal (for higher operating temperatures) |
| 2302 K C3 | Tapered bore, taper 1:12 · Radial clearance larger than normal (for higher operating temperatures) |
| 2302-2RS | Rubber seals on both sides (sealed), greased |
Click a designation to open it in the bearing finder. Suffix usage can differ slightly between brands.
Matching seal (radial shaft seal)
15 × 42 × 7 mm
Seal weight: ≈ 0.012 kg
Other common widths: 15 × 42 × 10 mm
The seal's inner diameter matches the shaft (15 mm) and its outer diameter matches the housing bore (42 mm); the width depends on the space in the housing. NBR (double lip, TC type) is recommended for general use and FKM (Viton) for high temperatures.
Quote for bearing and sealAll seal sizes and matching bearings →