24032 Bearing
Spherical roller bearing
- Bore d160 mm
- Outer dia. D240 mm
- Width B80 mm
- Weight≈ 12 kg
Heavy loads and misalignment: conveyors, crushers, vibrating screens, mining and marine equipment.
Technical data
| Bearing designation | 24032 |
|---|---|
| Type | Spherical roller bearing |
| Bore d | 160 mm |
| Outer dia. D | 240 mm |
| Width B | 80 mm |
| Weight | ≈ 12 kg |
Dimensions are standard catalogue values; the weight is an approximate calculation. Please confirm before ordering.
Common suffixes for 24032
| 24032 E | Reinforced internal design (higher load capacity) |
|---|---|
| 24032 CC | Spherical roller internal design (symmetrical rollers, steel cage) |
| 24032 CA | Spherical roller internal design (brass cage) |
| 24032 CC W33 C3 | CC internal design; lubrication groove and holes in the outer ring (W33) · Radial clearance larger than normal (for higher operating temperatures) |
| 24032 E C3 | Reinforced internal design (higher load capacity) · Radial clearance larger than normal (for higher operating temperatures) |
| 24032 K30 | Tapered bore, taper 1:30 |
Click a designation to open it in the bearing finder. Suffix usage can differ slightly between brands.
Matching seal (radial shaft seal)
160 × 240 × 15 mm
Seal weight: ≈ 0.42 kg
Other common widths: 160 × 240 × 12 mm, 160 × 240 × 20 mm
The seal's inner diameter matches the shaft (160 mm) and its outer diameter matches the housing bore (240 mm); the width depends on the space in the housing. NBR (double lip, TC type) is recommended for general use and FKM (Viton) for high temperatures.
Quote for bearing and sealAll seal sizes and matching bearings →
Matching sleeve
AH 24032 · shaft 150 mm
Withdrawal sleeve AH 24032: shaft diameter 150 mm, width 95 mm (taper 1:30).
AH 24032 weight: ≈ 2.2 kg
A sleeve mounts a tapered-bore bearing on a plain cylindrical shaft and bridges the difference between the bearing bore and the shaft diameter.
Use with a sleeve requires the tapered-bore version of the bearing: 24032 K30.
Quote for bearing and sleeve