24030 Bearing
Spherical roller bearing
- Bore d150 mm
- Outer dia. D225 mm
- Width B75 mm
- Weight≈ 9.8 kg
Heavy loads and misalignment: conveyors, crushers, vibrating screens, mining and marine equipment.
Technical data
| Bearing designation | 24030 |
|---|---|
| Type | Spherical roller bearing |
| Bore d | 150 mm |
| Outer dia. D | 225 mm |
| Width B | 75 mm |
| Weight | ≈ 9.8 kg |
Dimensions are standard catalogue values; the weight is an approximate calculation. Please confirm before ordering.
Common suffixes for 24030
| 24030 E | Reinforced internal design (higher load capacity) |
|---|---|
| 24030 CC | Spherical roller internal design (symmetrical rollers, steel cage) |
| 24030 CA | Spherical roller internal design (brass cage) |
| 24030 CC W33 C3 | CC internal design; lubrication groove and holes in the outer ring (W33) · Radial clearance larger than normal (for higher operating temperatures) |
| 24030 E C3 | Reinforced internal design (higher load capacity) · Radial clearance larger than normal (for higher operating temperatures) |
| 24030 K30 | Tapered bore, taper 1:30 |
Click a designation to open it in the bearing finder. Suffix usage can differ slightly between brands.
Matching seal (radial shaft seal)
150 × 225 × 15 mm
Seal weight: ≈ 0.36 kg
Other common widths: 150 × 225 × 12 mm, 150 × 225 × 20 mm
The seal's inner diameter matches the shaft (150 mm) and its outer diameter matches the housing bore (225 mm); the width depends on the space in the housing. NBR (double lip, TC type) is recommended for general use and FKM (Viton) for high temperatures.
Quote for bearing and sealAll seal sizes and matching bearings →