3302 Bearing
Double row angular contact ball bearing
- Bore d15 mm
- Outer dia. D42 mm
- Width B19 mm
- Weight≈ 0.12 kg
Radial plus axial loads in both directions: pumps, compressors, clutches and wheel bearings.
Technical data
| Bearing designation | 3302 |
|---|---|
| Type | Double row angular contact ball bearing |
| Bore d | 15 mm |
| Outer dia. D | 42 mm |
| Width B | 19 mm |
| Weight | ≈ 0.12 kg |
Dimensions are standard catalogue values; the weight is an approximate calculation. Please confirm before ordering.
Common suffixes for 3302
| 3302 A | Modified internal design |
|---|---|
| 3302 A-2RS | Modified internal design · Rubber seals on both sides (sealed), greased |
| 3302 A-2Z | Modified internal design · Metal shields on both sides (dust shields) |
| 3302 ATN9 | Modified internal design · Glass-fibre reinforced polyamide cage |
Click a designation to open it in the bearing finder. Suffix usage can differ slightly between brands.
Matching seal (radial shaft seal)
15 × 42 × 7 mm
Seal weight: ≈ 0.012 kg
Other common widths: 15 × 42 × 10 mm
The seal's inner diameter matches the shaft (15 mm) and its outer diameter matches the housing bore (42 mm); the width depends on the space in the housing. NBR (double lip, TC type) is recommended for general use and FKM (Viton) for high temperatures.
Quote for bearing and sealAll seal sizes and matching bearings →