JLM104948/JLM104910 Bearing

Inch tapered roller bearing

  • Bore d50 mm
  • Outer dia. D82 mm
  • Width T21.5 mm
  • Weight≈ 0.41 kg

Combined radial and axial loads: wheel hubs, agricultural machinery, differentials.

Technical data

Bearing designationJLM104948/JLM104910
TypeInch tapered roller bearing
Bore d50 mm
Outer dia. D82 mm
Width T21.5 mm
Weight≈ 0.41 kg

Designation meaning and notes

  • Set: cone JLM104948 + cup JLM104910. Dimensions in mm.

Dimensions are standard catalogue values; the weight is an approximate calculation. Please confirm before ordering.

Matching seal (radial shaft seal)

50 × 82 × 10 mm

Seal weight: ≈ 0.04 kg

Other common widths: 50 × 82 × 8 mm, 50 × 82 × 12 mm

The seal's inner diameter matches the shaft (50 mm) and its outer diameter matches the housing bore (82 mm); the width depends on the space in the housing. NBR (double lip, TC type) is recommended for general use and FKM (Viton) for high temperatures.

Quote for bearing and seal

All seal sizes and matching bearings →