N1040 Bearing
Cylindrical roller bearing
- Bore d200 mm
- Outer dia. D310 mm
- Width B51 mm
- Weight≈ 13 kg
High radial loads: gearboxes, rolling mills, large electric motors.
Technical data
| Bearing designation | N1040 |
|---|---|
| Type | Cylindrical roller bearing |
| Bore d | 200 mm |
| Outer dia. D | 310 mm |
| Width B | 51 mm |
| Weight | ≈ 13 kg |
Designation meaning and notes
- N: two ribs on the inner ring, outer ring without ribs.
Dimensions are standard catalogue values; the weight is an approximate calculation. Please confirm before ordering.
Common suffixes for N1040
| N1040 E | Reinforced internal design (higher load capacity) |
|---|---|
| N1040 ECP | Reinforced internal design, polyamide cage |
| N1040 ECJ | Reinforced internal design, pressed steel cage |
| N1040 ECM | Reinforced internal design, brass cage |
| N1040 EM | Reinforced internal design, brass cage |
| N1040 M | Machined brass cage |
| N1040 E C3 | Reinforced internal design (higher load capacity) · Radial clearance larger than normal (for higher operating temperatures) |
| N1040 EM C3 | Reinforced internal design, brass cage · Radial clearance larger than normal (for higher operating temperatures) |
Click a designation to open it in the bearing finder. Suffix usage can differ slightly between brands.
Matching seal (radial shaft seal)
200 × 310 × 20 mm
Other common widths: 200 × 310 × 15 mm
Seals this size are often made to order; send us the housing size and we'll confirm together.
The seal's inner diameter matches the shaft (200 mm) and its outer diameter matches the housing bore (310 mm); the width depends on the space in the housing. NBR (double lip, TC type) is recommended for general use and FKM (Viton) for high temperatures.
Quote for bearing and seal