NU202 Bearing
Cylindrical roller bearing
- Bore d15 mm
- Outer dia. D35 mm
- Width B11 mm
- Weight≈ 0.051 kg
High radial loads: gearboxes, rolling mills, large electric motors.
Technical data
| Bearing designation | NU202 |
|---|---|
| Type | Cylindrical roller bearing |
| Bore d | 15 mm |
| Outer dia. D | 35 mm |
| Width B | 11 mm |
| Weight | ≈ 0.051 kg |
Designation meaning and notes
- NU: two ribs on the outer ring, inner ring without ribs; the shaft can move axially.
Dimensions are standard catalogue values; the weight is an approximate calculation. Please confirm before ordering.
Common suffixes for NU202
| NU202 E | Reinforced internal design (higher load capacity) |
|---|---|
| NU202 ECP | Reinforced internal design, polyamide cage |
| NU202 ECJ | Reinforced internal design, pressed steel cage |
| NU202 ECM | Reinforced internal design, brass cage |
| NU202 EM | Reinforced internal design, brass cage |
| NU202 M | Machined brass cage |
| NU202 E C3 | Reinforced internal design (higher load capacity) · Radial clearance larger than normal (for higher operating temperatures) |
| NU202 EM C3 | Reinforced internal design, brass cage · Radial clearance larger than normal (for higher operating temperatures) |
Click a designation to open it in the bearing finder. Suffix usage can differ slightly between brands.
Matching seal (radial shaft seal)
15 × 35 × 7 mm
Seal weight: ≈ 8 g
Other common widths: 15 × 35 × 10 mm
The seal's inner diameter matches the shaft (15 mm) and its outer diameter matches the housing bore (35 mm); the width depends on the space in the housing. NBR (double lip, TC type) is recommended for general use and FKM (Viton) for high temperatures.
Quote for bearing and sealAll seal sizes and matching bearings →