NU230 Bearing
Cylindrical roller bearing
- Bore d150 mm
- Outer dia. D270 mm
- Width B45 mm
- Weight≈ 10 kg
High radial loads: gearboxes, rolling mills, large electric motors.
Technical data
| Bearing designation | NU230 |
|---|---|
| Type | Cylindrical roller bearing |
| Bore d | 150 mm |
| Outer dia. D | 270 mm |
| Width B | 45 mm |
| Weight | ≈ 10 kg |
Designation meaning and notes
- NU: two ribs on the outer ring, inner ring without ribs; the shaft can move axially.
Dimensions are standard catalogue values; the weight is an approximate calculation. Please confirm before ordering.
Common suffixes for NU230
| NU230 E | Reinforced internal design (higher load capacity) |
|---|---|
| NU230 ECP | Reinforced internal design, polyamide cage |
| NU230 ECJ | Reinforced internal design, pressed steel cage |
| NU230 ECM | Reinforced internal design, brass cage |
| NU230 EM | Reinforced internal design, brass cage |
| NU230 M | Machined brass cage |
| NU230 E C3 | Reinforced internal design (higher load capacity) · Radial clearance larger than normal (for higher operating temperatures) |
| NU230 EM C3 | Reinforced internal design, brass cage · Radial clearance larger than normal (for higher operating temperatures) |
Click a designation to open it in the bearing finder. Suffix usage can differ slightly between brands.
Matching seal (radial shaft seal)
150 × 270 × 15 mm
Seal weight: ≈ 0.65 kg
Other common widths: 150 × 270 × 12 mm, 150 × 270 × 20 mm
The seal's inner diameter matches the shaft (150 mm) and its outer diameter matches the housing bore (270 mm); the width depends on the space in the housing. NBR (double lip, TC type) is recommended for general use and FKM (Viton) for high temperatures.
Quote for bearing and sealAll seal sizes and matching bearings →