NUP1030 Bearing

Cylindrical roller bearing

  • Bore d150 mm
  • Outer dia. D225 mm
  • Width B35 mm
  • Weight≈ 4.6 kg

High radial loads: gearboxes, rolling mills, large electric motors.

Technical data

Bearing designationNUP1030
TypeCylindrical roller bearing
Bore d150 mm
Outer dia. D225 mm
Width B35 mm
Weight≈ 4.6 kg

Designation meaning and notes

  • NUP: inner ring rib plus loose rib washer; locates the shaft axially in both directions.

Dimensions are standard catalogue values; the weight is an approximate calculation. Please confirm before ordering.

Common suffixes for NUP1030

NUP1030 EReinforced internal design (higher load capacity)
NUP1030 ECPReinforced internal design, polyamide cage
NUP1030 ECJReinforced internal design, pressed steel cage
NUP1030 ECMReinforced internal design, brass cage
NUP1030 EMReinforced internal design, brass cage
NUP1030 MMachined brass cage
NUP1030 E C3Reinforced internal design (higher load capacity) · Radial clearance larger than normal (for higher operating temperatures)
NUP1030 EM C3Reinforced internal design, brass cage · Radial clearance larger than normal (for higher operating temperatures)

Click a designation to open it in the bearing finder. Suffix usage can differ slightly between brands.

Matching seal (radial shaft seal)

150 × 225 × 15 mm

Seal weight: ≈ 0.36 kg

Other common widths: 150 × 225 × 12 mm, 150 × 225 × 20 mm

The seal's inner diameter matches the shaft (150 mm) and its outer diameter matches the housing bore (225 mm); the width depends on the space in the housing. NBR (double lip, TC type) is recommended for general use and FKM (Viton) for high temperatures.

Quote for bearing and seal

All seal sizes and matching bearings →