QJ310 Bearing
Four-point contact ball bearing
- Bore d50 mm
- Outer dia. D110 mm
- Width B27 mm
- Weight≈ 1.3 kg
High axial loads in both directions: compressors, gearboxes and pump shafts.
Technical data
| Bearing designation | QJ310 |
|---|---|
| Type | Four-point contact ball bearing |
| Bore d | 50 mm |
| Outer dia. D | 110 mm |
| Width B | 27 mm |
| Weight | ≈ 1.3 kg |
Designation meaning and notes
- Four-point contact; split inner ring.
Dimensions are standard catalogue values; the weight is an approximate calculation. Please confirm before ordering.
Common suffixes for QJ310
| QJ310 MA | Machined brass cage, outer ring guided |
|---|
Click a designation to open it in the bearing finder. Suffix usage can differ slightly between brands.
Matching seal (radial shaft seal)
50 × 110 × 10 mm
Seal weight: ≈ 0.083 kg
Other common widths: 50 × 110 × 8 mm, 50 × 110 × 12 mm
The seal's inner diameter matches the shaft (50 mm) and its outer diameter matches the housing bore (110 mm); the width depends on the space in the housing. NBR (double lip, TC type) is recommended for general use and FKM (Viton) for high temperatures.
Quote for bearing and sealAll seal sizes and matching bearings →