21310 Bearing
Spherical roller bearing
- Bore d50 mm
- Outer dia. D110 mm
- Width B27 mm
- Weight≈ 1.2 kg
Heavy loads and misalignment: conveyors, crushers, vibrating screens, mining and marine equipment.
Technical data
| Bearing designation | 21310 |
|---|---|
| Type | Spherical roller bearing |
| Bore d | 50 mm |
| Outer dia. D | 110 mm |
| Width B | 27 mm |
| Weight | ≈ 1.2 kg |
Dimensions are standard catalogue values; the weight is an approximate calculation. Please confirm before ordering.
Common suffixes for 21310
| 21310 E | Reinforced internal design (higher load capacity) |
|---|---|
| 21310 EK | Reinforced internal design (higher load capacity) · Tapered bore, taper 1:12 |
| 21310 CC | Spherical roller internal design (symmetrical rollers, steel cage) |
| 21310 CCK | Spherical roller internal design (symmetrical rollers, steel cage) · Tapered bore, taper 1:12 |
| 21310 CA | Spherical roller internal design (brass cage) |
| 21310 CAK | Spherical roller internal design (brass cage) · Tapered bore, taper 1:12 |
| 21310 CC W33 C3 | CC internal design; lubrication groove and holes in the outer ring (W33) · Radial clearance larger than normal (for higher operating temperatures) |
| 21310 CAK W33 C3 | Spherical roller internal design (brass cage) · Tapered bore, taper 1:12 · Lubrication groove and 3 lubrication holes in the outer ring · Radial clearance larger than normal (for higher operating temperatures) |
| 21310 E C3 | Reinforced internal design (higher load capacity) · Radial clearance larger than normal (for higher operating temperatures) |
Click a designation to open it in the bearing finder. Suffix usage can differ slightly between brands.
Matching seal (radial shaft seal)
50 × 110 × 10 mm
Seal weight: ≈ 0.083 kg
Other common widths: 50 × 110 × 8 mm, 50 × 110 × 12 mm
The seal's inner diameter matches the shaft (50 mm) and its outer diameter matches the housing bore (110 mm); the width depends on the space in the housing. NBR (double lip, TC type) is recommended for general use and FKM (Viton) for high temperatures.
Quote for bearing and sealAll seal sizes and matching bearings →
Matching sleeve
H 310 · shaft 45 mm
Adapter sleeve H 310: shaft diameter 45 mm, bearing bore 50 mm, width 42 mm. Used with lock nut KM10 and lock washer MB10.
H 310 set weight (incl. lock nut and lock washer): ≈ 0.29 kg
Withdrawal sleeve AHX 310: shaft diameter 45 mm, width 35 mm.
AHX 310 weight: ≈ 0.11 kg
A sleeve mounts a tapered-bore bearing on a plain cylindrical shaft and bridges the difference between the bearing bore and the shaft diameter.
Use with a sleeve requires the tapered-bore version of the bearing: 21310 K.
Quote for bearing and sleeve