How to read a bearing number
Updated: 19 November 2026 · Çağ Rulman technical team
Short answer
In standard bearing numbers the last two digits give the bore diameter: 00 = 10 mm, 01 = 12 mm, 02 = 15 mm, 03 = 17 mm; from 04 upwards multiply the two digits by 5 (04 → 20 mm, 10 → 50 mm). The leading digit or letters give the bearing type (6 = deep groove ball, 3 = tapered roller, NU = cylindrical roller) and the next digit the dimension series. Suffixes such as 2RS, ZZ and C3 describe seals, shields and internal clearance.
1. Last two digits: bore diameter (d)
In standard bearings the last two digits give the shaft diameter, i.e. the bore of the bearing. From 04 upwards the number is multiplied by 5.
| Last two digits | Bore d |
|---|---|
| 00 | 10 mm |
| 01 | 12 mm |
| 02 | 15 mm |
| 03 | 17 mm |
| 04 | 20 mm |
| 05 | 25 mm |
| 06 | 30 mm |
| 08 | 40 mm |
| 10 | 50 mm |
| 12 | 60 mm |
| 15 | 75 mm |
| 20 | 100 mm |
In small three-digit bearings the last digit is the bore itself: 608 → 8 mm, 625 → 5 mm. Bores of 500 mm and above are written after a slash (e.g. 230/500 → 500 mm); in numbers such as 62/22 the figure after the slash is the bore (22 mm).
2. Leading digit or letters: bearing type
The start of the number shows the bearing type. The sizes of the examples are catalogue values.
| Prefix | Bearing type | Example | Size (d × D × B) |
|---|---|---|---|
| 1 | Self-aligning ball bearing | 1205 | 25 × 52 × 15 mm |
| 22 · 23 · 21 | Spherical roller bearing | 22216 | 80 × 140 × 33 mm |
| 30 · 32 · 33 | Tapered roller bearing | 30205 | 25 × 52 × 16.25 mm |
| 51 · 52 | Thrust ball bearing | 51105 | 25 × 42 × 11 mm |
| 6 | Deep groove ball bearing | 6204 | 20 × 47 × 14 mm |
| 7 | Angular contact ball bearing | 7204 | 20 × 47 × 14 mm |
| N · NU · NJ · NUP | Cylindrical roller bearing | NU 210 | 50 × 90 × 20 mm |
| QJ | Four-point contact ball bearing | QJ210 | 50 × 90 × 20 mm |
| UC · UCP · UCF | Insert bearing (UC) | UCP205 | 25 × 52 × 34.1 mm |
| HK · NA | Needle roller bearing | NA4905 | 25 × 42 × 17 mm |
3. Next digit: dimension series
For the same bore, a higher series number means a larger outside diameter and width: the bearing is heavier and carries more load. Example: deep groove ball bearings with a 20 mm bore.
| Number | Series | Size (d × D × B) | Weight |
|---|---|---|---|
| 6004 | 60 – extra light series | 20 × 42 × 12 mm | ≈ 0.069 kg |
| 6204 | 62 – light series | 20 × 47 × 14 mm | ≈ 0.11 kg |
| 6304 | 63 – medium series | 20 × 52 × 15 mm | ≈ 0.14 kg |
| 6404 | 64 – heavy series | 20 × 72 × 19 mm | ≈ 0.38 kg |
4. Suffixes after the number
Letters after the basic number do not change the size; they describe seals, shields, internal clearance, cage or bore type. The most common: 2RS (rubber seals on both sides), ZZ (metal shields on both sides), C3 (clearance greater than normal), K (tapered bore). See the bearing suffix guide for all of them.
Example: how to read 6205-2RS C3
| Part | Meaning |
|---|---|
| 6 | Deep groove ball bearing |
| 2 | Light series (62) |
| 05 | Bore 05 × 5 = 25 mm |
| 2RS | Rubber seals on both sides |
| C3 | Internal clearance greater than normal |
Result: 6205 is a deep groove ball bearing, 25 × 52 × 15 mm, weight ≈ 0.13 kg; sealed on both sides with C3 clearance.
Number worn off? Find it by three measurements
If the number on the side face has worn off, measure three values with a caliper: bore (d), outside diameter (D) and width (B). Enter them in the bearing finder to list matching bearings and the right seal.
Frequently asked questions
What is the bore of a 6204 bearing?
20 mm. The last two digits are 04, so 04 × 5 = 20 mm; full size 20 × 47 × 14 mm.
Are 6204 and 6204-2RS the same size?
Yes. The 2RS suffix only means rubber seals on both sides; bore, outside diameter and width are identical.
How do I identify a bearing with no visible number?
Measure bore, outside diameter and width with a caliper and enter them in the bearing finder, or send the sizes to us on WhatsApp.
