Drawn cup needle roller bearing (HK): design, sizes, series and uses
Updated: 19 November 2026 · Çağ Rulman technical team
Short answer
The drawn cup needle roller bearing (HK) has a thin drawn steel outer cup and no inner ring; the needles run directly on the hardened shaft. The first two digits give the shaft diameter and the last two the width. Our catalogue lists 47 sizes with bores from 3 mm to 60 mm.
Key facts
| Load | Radial, compact |
|---|---|
| Typical use | Very tight spaces: gearboxes, steering and pedal mechanisms; the shaft itself acts as the raceway. |
| Sizes in the catalogue | 47 designations |
| Bore range (d) | 3 – 60 mm |
| Outside diameter range (D) | 6.5 – 68 mm |
| Weight range | ≈ 0.5 g – ≈ 0.059 kg |
Example sizes
| Number | Fw (mm) | D (mm) | C (mm) | Weight |
|---|---|---|---|---|
| HK0306 | 3 | 6.5 | 6 | ≈ 0.5 g |
| HK0608 | 6 | 10 | 8 | ≈ 1 g |
| HK0808 | 8 | 12 | 8 | ≈ 2 g |
| HK0912 | 9 | 13 | 12 | ≈ 3 g |
| HK1015 | 10 | 14 | 15 | ≈ 4 g |
| HK1312 | 13 | 19 | 12 | ≈ 6 g |
| HK1612 | 16 | 22 | 12 | ≈ 7 g |
| HK2010 | 20 | 26 | 10 | ≈ 7 g |
| HK2020 | 20 | 26 | 20 | ≈ 0.015 kg |
| HK2516 | 25 | 32 | 16 | ≈ 0.017 kg |
| HK2816 | 28 | 35 | 16 | ≈ 0.019 kg |
| HK3020 | 30 | 37 | 20 | ≈ 0.025 kg |
Common suffixes for HK2016
| 2RS | Rubber seals on both sides (sealed), greased |
|---|---|
| RS | Rubber seal on one side |
See all 47 sizes in the catalogue →
Frequently asked questions
What load does it carry? (drawn cup needle roller bearing (HK))
Radial, compact. Very tight spaces: gearboxes, steering and pedal mechanisms; the shaft itself acts as the raceway.
What type of bearing is HK2016?
HK2016: drawn cup needle roller bearing (HK); size 20 × 26 × 16 mm, weight ≈ 0.012 kg.
