Thrust ball bearing: design, sizes, series and uses
Updated: 19 November 2026 · Çağ Rulman technical team
Short answer
A thrust ball bearing consists of a shaft washer, a housing washer and a ball-and-cage assembly. It carries axial (thrust) loads only, not radial loads. Our catalogue lists 120 sizes with bores from 10 mm to 400 mm.
Key facts
| Load | Axial only |
|---|---|
| Typical use | Axial (thrust) loads only: vertical shafts, jacks, turntables. |
| Sizes in the catalogue | 120 designations |
| Bore range (d) | 10 – 400 mm |
| Outside diameter range (D) | 24 – 480 mm |
| Weight range | ≈ 0.019 kg – ≈ 37 kg |
Common series
| Series | Sizes | Bore range (d) | Example and size |
|---|---|---|---|
| 511 | 40 | 10 – 400 mm | 51110 50 × 70 × 14 mm |
| 512 | 35 | 10 – 300 mm | 51210 50 × 78 × 22 mm |
| 513 | 25 | 25 – 200 mm | 51311 55 × 105 × 35 mm |
| 514 | 20 | 25 – 150 mm | 51411 55 × 120 × 48 mm |
Example sizes
| Number | d (mm) | D (mm) | B (mm) | Weight |
|---|---|---|---|---|
| 51104 | 20 | 35 | 10 | ≈ 0.037 kg |
| 51204 | 20 | 40 | 14 | ≈ 0.076 kg |
| 51105 | 25 | 42 | 11 | ≈ 0.056 kg |
| 51205 | 25 | 47 | 15 | ≈ 0.11 kg |
| 51305 | 25 | 52 | 18 | ≈ 0.17 kg |
| 51106 | 30 | 47 | 11 | ≈ 0.065 kg |
| 51206 | 30 | 52 | 16 | ≈ 0.13 kg |
| 51306 | 30 | 60 | 21 | ≈ 0.26 kg |
| 51107 | 35 | 52 | 12 | ≈ 0.08 kg |
| 51207 | 35 | 62 | 18 | ≈ 0.21 kg |
| 51307 | 35 | 68 | 24 | ≈ 0.37 kg |
| 51308 | 40 | 78 | 26 | ≈ 0.52 kg |
Common suffixes for 51105
| M | Machined brass cage |
|---|
See all 120 sizes in the catalogue →
Frequently asked questions
What load does it carry? (thrust ball bearing)
Axial only. Axial (thrust) loads only: vertical shafts, jacks, turntables.
What type of bearing is 51105?
51105: thrust ball bearing; size 25 × 42 × 11 mm, weight ≈ 0.056 kg.
