Withdrawal sleeve (AH): design, sizes, series and uses
Updated: 19 November 2026 · Çağ Rulman technical team
Short answer
A withdrawal sleeve (AH) seats a tapered-bore bearing on the shaft and makes dismounting easier; on large bearings it is pulled out with a nut. Our catalogue lists 146 sizes with bores from 35 mm to 460 mm.
Key facts
| Load | Mounting part (fixes the bearing to the shaft) |
|---|---|
| Typical use | Seats a tapered-bore bearing on the shaft and simplifies removal; used especially with large spherical roller bearings and on stepped shafts. |
| Sizes in the catalogue | 146 designations |
| Bore range (d) | 35 – 460 mm |
| Outside diameter range (D) | 40 – 480 mm |
| Weight range | ≈ 0.072 kg – ≈ 64 kg |
Common series
| Series | Sizes | Bore range (d) | Example and size |
|---|---|---|---|
| AH241 | 22 | 105 – 460 mm | AH24152 240 × 260 × 202 mm |
| AH240 | 13 | 115 – 460 mm | AH24040 190 × 200 × 127 mm |
| AH39 | 13 | 220 – 460 mm | AH3972 340 × 360 × 112 mm |
| AHX23 | 8 | 45 – 95 mm | AHX2312 55 × 60 × 58 mm |
| AHX3 | 8 | 45 – 105 mm | AHX312 55 × 60 × 40 mm |
| AH30 | 6 | 150 – 280 mm | AH3052 240 × 260 × 128 mm |
| AHX31 | 5 | 95 – 135 mm | AHX3124 115 × 120 × 75 mm |
| AHX30 | 4 | 115 – 145 mm | AHX3028 135 × 140 × 68 mm |
| AH3 | 3 | 35 – 75 mm | AH309 40 × 45 × 31 mm |
| AH31 | 3 | 190 – 220 mm | AH3144 200 × 220 × 145 mm |
Example sizes
| Number | d1 (mm) | d (mm) | B1 (mm) | Weight |
|---|---|---|---|---|
| AH2308 | 35 | 40 | 40 | ≈ 0.11 kg |
| AHX2314G | 65 | 70 | 64 | ≈ 0.35 kg |
| AHX2320 | 95 | 100 | 90 | ≈ 0.82 kg |
| AHX3024 | 115 | 120 | 60 | ≈ 0.56 kg |
| AHX3028 | 135 | 140 | 68 | ≈ 0.78 kg |
| AH3232G | 150 | 160 | 124 | ≈ 3.1 kg |
| AH3238G | 180 | 190 | 145 | ≈ 4.6 kg |
| AH3048 | 220 | 240 | 116 | ≈ 7 kg |
| AH3060 | 280 | 300 | 145 | ≈ 12 kg |
| AH3268G | 320 | 340 | 264 | ≈ 29 kg |
| AH3080G | 380 | 400 | 183 | ≈ 21 kg |
| AHX3088G | 420 | 440 | 194 | ≈ 25 kg |
See all 146 sizes in the catalogue →
Frequently asked questions
What load does it carry? (withdrawal sleeve (AH))
Mounting part (fixes the bearing to the shaft). Seats a tapered-bore bearing on the shaft and simplifies removal; used especially with large spherical roller bearings and on stepped shafts.
What type of bearing is AH316?
AH316: withdrawal sleeve (AH); size 75 × 80 × 48 mm, weight ≈ 0.28 kg.
